waterjet orifice

WaterjetWaterjet, which uses water as the knife, whose real name is high-pressure water jet cutting technology. Waterjet is widely used in many industries such as ceramics, stone, glass, metal, composite materials and so on. At present in China, the maximum pressure of waterjet has reached 420MPa. Some technologically advanced companies have perfected 3-axis and 4-axis waterjets, and 5-axis waterjets are also maturing. At the same time, due to the flexibility of the robot, the technology of the waterjet robot is also constantly rising and improving. Waterjet robots are mostly used in the cutting and assembly line of car interiors.

Waterjet gems play the most important role as accessories for the most important part of water cutting heads. Ordinary water passes through an ultra-high pressure pressurizer to pressurize the water to 4,000 bar (60,000 psi), and then through a small nozzle (with a diameter of 0.004 inches to 0.016 inches), can produce a channel of up to 915 meters per second (about Water arrows, three times the speed of sound), this water arrow can be used for various surface treatments and cutting various non-metallic materials such as paper, diapers, glass, fiber, sponge, etc. For cutting metal and hard materials such as various stones, glass, ceramics, ceramic tiles, etc., FLOW has also developed a patented and more complete design, which is to mix sand and water arrows to enhance its cutting ability. This high-speed sanding waterjet can cut almost any material.

There are four types of new type gems. The shape of this type of gems is mostly wide and narrow. From the top, the surface is smooth. From the side, it looks like an eaves. The eaves have a diameter of 0.49 and a height of 0.257. The diameter is 0.42, and the angle of the straight lines on the lowermost sides is 60 degrees. (The data is for reference only) The four gems have their own names and numbers，No.1:Ruby Orifice ,The part number is 014201‑XX;NO.2:Diamond Orifice,The part number is 014155‑XX;No.3:Diamond Orifice, Water-only,The part number is 1-12498D-XXXNo.4:Ultra Sapphire Orifice ,The part number is 014201.According to the diameter of the gem's water outlet, you can find the label.

Paser® 4 orifices

There are three kinds of these orifices, which are No.1:Ruby Orifice The part number is 041759‑XX ;No.2:Diamond Orifice ,The part number is 015849-XX;No. 3:Ultra Sapphire Orifice ，The part number is 041759.The outer diameter of this type of orifice is almost the same. The overall height is 0.205. The outer diameter is 0.376, and the angle of the two straight lines extending from the outermost end is 87 degrees. (The data is for reference only) The rated pressure is 60k

Paser®3 orifice

This kind of orifice has a small slope above it, the angle of the slope is 2 degrees, the overall height is 0.275. The outer diameter is 0.290, and the middle angle after the straight line of the lower end extends 60 degrees. (The data is for reference only).

There are two categories:No.1:Ruby Orifice,The part number is 009519-XX or TL-003002-XX;No.2:Ultra Sapphire Orifice,The part number is 009519 or 00300

Paser® 2 orifice

This type of orifice is the only orifice with a small tail in the paser® orifice series. There are 3 types of orifices, which are Ruby Orifice,The part number is 001821-XX;Diamond Orifice,The part number is D-5071-XX；Ultra Sapphire Orifice，The part number is 00182.The outer diameter of the small tail at the lower end is 0.125. The outer diameter at the middle is 0.375, the outer diameter at the top is 0.259. The overall height is 0.24. (The data is for reference only). If you want to find it quickly, enter the number plus the inner diameter of the outlet.

Standard-mount orifices

There are 3 types of orifices，Ruby Orifice ,The part number is 004519-XX;Diamond Orifice,The part number is 004519-XX;Ultra Sapphire Orifice,The part number is 004519.It is different from the Low-mass orifices series of orifice in that the inner angle of the outer edge of the top line extends linearly, and the outer diameter of the small tail below is also different. different. The outer diameter is 0.375, the outer diameter of the small tail at the lower end is 0.125, the inner angle after the straight extension of the outer edge of the top is 90 degrees, and the overall height is 0.234. (The data is for reference only)

Low-mass orifices

Like the Standard-mount orifice series of orifices, it is divided into 3 types。Ruby Orifice,The part number is 003788-XX or TL-003003-XX;Diamond Orifice,The part number is D-5071-XX or TL-003004-XX;Ultra Sapphire Orifice,The part number is 003788 or 003003.The outer diameter of the whole is 0.270, the outer diameter of the small tail at the lower end is 0.123, the overall height is 0.234, and the inner angle of the outer edge of the upper end is 84 degrees (data is for reference only)